Blog

Homeowners nowadays are looking to buy the best of the best. When it comes to cabinets, they need to be long-lasting, quality, and durable. KCMA certified cabinets are trusted because they are tested. One study conducted by Hanley-Wood shows that 3rd party testing is identified as one of the top reasons people choose specific Cabinet Manufacturers Denver.

What is KCMA?

KCMA certified cabinets are essentially a certification. The KCMA A161.1 Quality Certification is an independent, 3rd-party testing program. This gives you, as a homeowner, peace of mind knowing that your cabinets are of the utmost quality.

About KCMA Quality Certification

Cabinets bearing the KCMA A161.1 Quality Certification Seal have been extensively tested. This is over more than a dozen processes. This is according to rigorous standards developed, and periodically revised, by a committee operating. These are done under rules set by the American National Standards Institute (ANSI) and developed by the Kitchen Cabinet Manufacturers Association (KCMA).

Requirements of KCMA Quality Certification

To begin the process for certification under the ANSI/KCMA A161.1 Standard, American cabinet manufacturers need to ensure that the line meets the following requirements. After ensuring that these are met, 8 categories of tests are conducted.

1. “All cabinets must be fully enclosed with backs, bottoms, sides, and tops on wall cabinets; and backs, bottoms, and sides on base cabinets, with certain specified exceptions on kitchen sink fronts, sink bases, oven cabinets, and refrigerator cabinets.
2. All cabinets designed to rest on the floor must be provided with a toe space at least two inches deep and three inches high.
3. All utility cabinets must meet the same construction requirements as base and wall cabinets.
4. Doors and drawers must be properly aligned, have means of closure, and close without excessive binding or looseness.
5. All materials must ensure rigidity in compliance with performance standards.
6. Face frames, when used, must provide rigid construction.
7. For frameless cabinets, the ends, tops/bottoms, and back shall be of thickness necessary to provide rigid construction.
8. Corner or lineal bracing must be provided at points where necessary to ensure rigidity and proper joining of various components.
9. All wood parts must be dried to a moisture content of 10 percent or less at the time of fabrication.
10. All materials used in cabinets must be suitable for use in the kitchen and bath environment where they may be exposed to grease, solvents, water, detergent, steam and other substances usually found in these rooms.
11. All exterior exposed surfaces and edges except the edges of end panels and the edges of back panels, shall be free of saw marks and other imperfections and shall be filled and sanded, edge-banded or otherwise finished to ensure compliance with the performance standards.
12. All exterior exposed parts of cabinets must have nails and staples set and holes filled.
13. All exposed construction joints must be fitted in a workman-like manner consistent with specifications.
14. Exposed cabinet hardware must comply with Builders Hardware Manufacturing Association finishing standards.”

There are many different types of countertops. When it comes to Granite Countertops Denver, they can be a bit more expensive, and not everyone can afford this. Tile kitchen countertops are a wonderful choice if you are looking for a better and more affordable price point, as compared to solid stone units. Countertop tile can be made from materials such as granite or quartz, but are typically a lot less valuable, meaning cheaper. They are also easy to both install and repair.

Ceramic

Ceramic tile is made from natural clay. It is baked, which then removes the extra moisture. There are many different color options as well as designs that can match virtually any kitchen style. It is also known to be extremely affordable, as well as easy to install, and easy to maintain too. Ceramic is waterproof and able to withstand high temperatures from hot dishes. The only downside is that it can easily crack or chip when heavy objects are placed on it, and if you choose the wrong color, grout stains are possible. To combat this, choose dark grout and use a grout sealer.

Mosaic

Mosaic tile is small and comes in 1-inch square units. In some cases, it is sold in large sheets that are attached to the mesh, which makes the installation very quick and easy. The tiles can be mixed in order to make beautiful patterns, and they are known to be durable as well. Another advantage is that because they are the same color throughout, any cracks will not be visible.

Granite

Granite is a natural stone and is commonly used because it looks exactly like the stones used for slabs, it can offer the same beauty as a slab, but at a lower price. These tiles often have a surface that hides dirt and fingerprints, and they are very strong. Similar to other granite products the tiles must be sealed after installation and continually sealed every year.

Quartz

Quartz is a manufactured product that is designed to look similar to granite. It is made from crushed quartz crystals pressed together with resin and they offer incredible performance. Quartz tile is smooth and has consistent grain, which means it is less expensive than granite and is even more durable. One plus is that quartz tiles do not need to be sealed, and they are completely nonporous. This means that they are anti-bacterial, but they cannot be repaired as easily as granite. Despite this, it is a bit different from real stone.

Making Your Choice

Deciding what type of stone or tile to use in your kitchen can be difficult. There are many different choices, and options to choose from. Despite this, you can look based on your budget, and style, and hopefully make a good choice for your home.

Everyone homeowner wants to have granite countertops, but finding the best granite supplier can be difficult. There are many different companies that offer this service, but it can be hard to know if you are choosing the best company in all of Denver. If you are looking forward to enjoying granite in your home for the next years to come, follow these tips to find the best granite suppliers in Denver.

Ask for a Custom Quote

It can be easy to get a generalized quote from a supplier, but getting a custom quote means that you know exactly what you will be paying. Granite suppliers and installers always offer free custom quotes. After getting in touch you can ask for their help in making a choice for your granite countertop. This is also important because oftentimes you will be looking for a slab that will eventually be made into your countertops.

This whole process is important to watch carefully because you will also be able to see the level of customer service that this company offers. Will they go out of their way to assist you? Will they offer you a fair price? Be sure not to spring on the lowest price you see because this can lead to

Ask For Recommendations

If you have anyone in your life who has recently had their countertops done, then you might want to ask them. Ask who their supplier is and how much they spent. Although you might not go with that supplier, it is good to have for comparison.

You should ask how the project went, and if their expectations were met. Try to remember that this is an important investment in your home and not a cheap one. You should be able to ask questions and rely on your contractor.

Discuss With Contractors and Decide Based on Experience

After you have taken a list down of contractors, you should schedule an appointment to ensure that they can come to visit the project site. Ask about granite samples, any recommendations in your price range, and their previous project results. Having the contractor come to your home can ensure that you get an accurate estimate and overall projected cost.

This is also the time to talk to the team about their experience. This will allow you to learn how long they have been providing services in the area, and when they would be able to begin the project.

You should always look beyond the price of granite installation and go with the best installer. This is important because although someone might be cheaper, their work may not be as high of quality. They may charge less because they are desperate for business, or because they carry less insurance than other providers.

Contact Us Today

At KBD we are the best Granite Suppliers Denver. Contact us today for a free quote, or to learn about our high-quality products at fair prices.